About Me

My name is Laurens van Duijn. I work as a Virtualization Consultant at ITQ.
This blog will be content-rich in Virtualization (specifically the VMware EUC stack, vSphere, and Drones. Work and play combine just fine! Check out my Youtube  Drone Channel here! I currently fly freestyle with a custom-built drone that consists of Rotor Riot HD1 Frame with Hobbywing G3 F3 and 60a 4-1 ESC with Hypetrain Drib V2 2306 2650kv motors. DJI Digital FPV Air Unit, Controller and Goggles. Before that, I flew with an ImmersionRC Vortex 230 Mojo connected on TBS Crossfire. You gotta love that range! For racing, I use 3 Emax Hawk 5 drones with customizations. One cannot have enough spare drones on the track 🙂 Also, have or played around with the ImmersionRC Vortex 150 and the ImmersionRC Vortex 180. Before those, I flew with DJI Inspire 1, DJI Phantom 4DJI Phantom 2 Vision + with mods and modified parrot drones.

VMware vExpert 2016,2017,2018 and 2019, vExpert NSX 2019 and VMware EUC Champion 2018:

VMware Certifications:

            VCP6-DCV            VCP6-DTM            VCP6-NV

            VCP-NV 2019            VCAP7-DTM Design            VCIX7-DTM

    VCAP6-DTM Deploy    VCAP6-DTM Design            VCIX6-DTM

    VCAP6-NV Deploy    VCAP6-NV Design            VCIX6-NV

        VCP6-NV/DTM        VCP6-DCV/NV       VCP6-DCV/DTM

VMW_09Q3_LGO_VMwareAdvancedServices_K   VMW_09Q3_LGO_VMwareAdvancedServices_K

VMware AirWatch:


Veeam v8 and v9:


The views and opinions expressed anywhere on this blog are my own and do not reflect the views and opinions of my employer. This site uses cookies but only to get the most optimal experience! Accept the banner if you want, this is your choice but be aware the site will look like 1990 if you don’t and this is on you!